How to Trade and Swap SatoshiShiba (STS) on Raydium and Jupiter: An In-Depth Guide
- satoshishibacoin
- Feb 4
- 5 min read
Introduction
Swapping tokens on Solana is fast and low-cost, but doing it safely and correctly matters—especially when you’re trading community-driven tokens like SatoshiShiba (STS). Two of the most widely used options in the Solana ecosystem are Raydium (a major Solana DEX) and Jupiter (a Solana swap aggregator that routes trades for best execution).
This guide explains, step by step, how to swap and trade SatoshiShiba (STS) on Raydium and Jupiter, how pricing works, what slippage really means, and how to avoid common mistakes like buying the wrong token or using unofficial contract addresses.
Educational note: This is not financial advice. Crypto is volatile—always do your own research and use only official token links and contract addresses.
Before You Start: What You Need
1) A Solana Wallet
Most users trade on Solana using wallets like:
Phantom
Solflare
Backpack
Make sure your wallet is installed from official sources only, and that you have secure backups of your seed phrase offline.
2) SOL for Fees (and Often for Swaps)
Even though Solana fees are low, you still need a small amount of SOL:
For network transaction fees
Sometimes as the input token (e.g., swapping SOL → STS)
A tiny amount usually covers multiple swaps, but keep a buffer in your wallet.
3) The Official STS Token Contract Address
This is the single most important safety step.
Only use the STS contract address from the official SatoshiShiba website.Do not use addresses posted in DMs, random Telegram comments, or “verified” screenshots.
Understanding Swaps vs Trading on Solana
Swapping (Most common)
A “swap” means you exchange one token for another instantly:
SOL → STS
USDC → STS
STS → SOL
This is how most individuals “buy” or “sell” tokens on DEXs.
Trading (More advanced)
Some DEX interfaces offer charts, order-style tools, or deeper pool data. But in Solana DeFi, most retail users still use swaps for simplicity.
Key Concepts You Must Understand (To Trade STS Safely)
1) Slippage
Slippage is the difference between the expected price and the final executed price.
You may need higher slippage when:
Liquidity is lower
Trading volume is high
The token is volatile
Best practice: Start low (e.g., 0.5%–1%), then increase only if your swap fails.
2) Price Impact
Price impact measures how much your trade moves the market price. Bigger trades in smaller pools = higher price impact.
Rule: If price impact looks unusually high, reduce trade size or try Jupiter (aggregator) to route across pools.
3) Liquidity
Liquidity is the amount of tokens available in the pool(s). Higher liquidity generally means:
Better swap execution
Lower price impact
More stable pricing
Part 1: How to Swap SatoshiShiba (STS) on Raydium
What Is Raydium?
Raydium is one of the core decentralized exchanges on Solana, supporting swaps, liquidity pools, and broader DeFi tools. If STS has a liquidity pool on Raydium, users can swap directly through it.
Step-by-Step: Swap STS on Raydium
Step 1) Connect Your Wallet
Open Raydium’s swap page (official site only)
Click Connect Wallet
Choose your wallet (Phantom/Solflare/etc.)
Approve the connection request in your wallet popup
Safety tip: Always confirm the domain is correct before connecting.
Step 2) Select Your Input Token
Choose what you’re swapping from, commonly:
SOL
USDC
Enter the amount you want to swap.
Step 3) Select STS as the Output Token
When you select the token you want to receive:
Search “STS” / “SatoshiShiba”
If it doesn’t show clearly or multiple versions appear:
Paste the official STS contract address to load the correct token
This avoids the biggest mistake in DeFi: buying a fake/duplicate token.
Step 4) Set Slippage (Smart Settings)
Raydium lets you adjust slippage tolerance.
Suggested starting points:
Normal conditions: 0.5%–1%
If swap fails: 1%–3%
High volatility: 3%+ only if necessary
Avoid setting extremely high slippage unless you fully understand the risk (you may get a worse fill).
Step 5) Review Price Impact + Minimum Received
Before confirming:
Check price impact (lower is better)
Check minimum received (protects you from execution surprises)
If the minimum received looks too low relative to your expected amount, reduce trade size or use Jupiter for a better route.
Step 6) Confirm the Swap
Click Swap
Approve in your wallet
Wait for confirmation
Once confirmed, STS should appear in your wallet. If it doesn’t:
Add the token manually using the official contract address
Common Raydium Issues (And Fixes)
“Transaction Failed”
Usually caused by:
Slippage too low
Network congestion
Not enough SOL for fees
Fix:
Slightly increase slippage
Reduce trade size
Keep extra SOL available
Token Not Showing
Fix:
Add token manually using STS contract address
Refresh wallet token list
Part 2: How to Swap and Trade STS on Jupiter Exchange
What Is Jupiter?
Jupiter is a Solana swap aggregator. Instead of swapping from a single pool, Jupiter routes your trade through the best available path across multiple DEXs (which may include Raydium pools, among others).
This often results in:
Better price execution
Lower slippage
Lower price impact
Step-by-Step: Swap STS on Jupiter
Step 1) Connect Wallet
Open Jupiter (official domain)
Click Connect Wallet
Approve the connection in your wallet
Step 2) Choose Your Input Token
Select SOL or USDC (or another token you hold).
Enter your amount.
Step 3) Choose STS as Output Token (Contract Address Verification)
Search STS / SatoshiShiba.
If more than one result appears or anything looks unclear:
Paste the official STS token contract address directly into Jupiter
This ensures you’re swapping into the real SatoshiShiba (STS) token.
Step 4) Review Route, Fees, and Slippage
One of Jupiter’s best features is route transparency.
You’ll see:
The route used (which pools/DEXs it uses)
Estimated output
Price impact / slippage estimate
If the route looks unusual, reduce size or try alternate inputs (e.g., USDC instead of SOL).
Step 5) Confirm Swap and Approve
Click swap, approve in your wallet, and wait for confirmation.
Raydium vs Jupiter: Which Should You Use for STS?
Use Raydium if:
You want to swap directly in a specific STS pool
You’re monitoring that pool’s liquidity and activity
You prefer a direct DEX interface
Use Jupiter if:
You want the best available execution across Solana
You’re concerned about price impact
You want route optimization automatically
Most individuals prefer Jupiter for everyday swaps because it aggregates liquidity and often reduces price impact.
Advanced Section: Trading STS Responsibly (Real-World Tips)
1) Start Small
Your first swap should be small to confirm:
You are using the correct STS token
Your wallet displays STS properly
Slippage settings are reasonable
2) Watch Price Impact Before Scaling
If price impact rises sharply, split trades into smaller orders.
3) Avoid Peak Hype Moments
During high volatility, spreads widen and slippage increases.
4) Keep Your Security Tight
Never share seed phrases
Avoid unknown links
Ignore “support” DMs
Bookmark official sites
Frequently Asked Questions (FAQ)
Can I swap STS with SOL or USDC?
Usually yes, depending on available pools and routing. Many Solana swaps use SOL or USDC as common base pairs.
Why does my swap fail even with enough SOL?
Common causes include:
Slippage too low
Route changing during confirmation
Temporary congestion
Try:
Slightly higher slippage
Smaller size
Re-attempt after a minute
Why is there more than one “STS” token result?
Tickers can be duplicated. Always verify using the official STS contract address.
Final Thoughts
Swapping and trading SatoshiShiba (STS) on Solana can be straightforward—if you follow best practices:
Use only official links
Verify the STS contract address
Understand slippage and price impact
Consider Jupiter for best routing
Start small and scale responsibly
Raydium offers a direct DEX experience, while Jupiter helps optimize execution by routing through multiple liquidity sources. Both can be useful depending on your goals and trading style.
Comments